Need help?Do you have a question about the ALLEN & HEATH ZED Sixty-10FX and is the answer not in the manual?
General| Channels | 10 |
|---|---|
| Mic Inputs | 4 |
| Line Inputs | 6 |
| Stereo Channels | 2 |
| FX Sends | 1 |
| Effects | Yes |
| Built-in Effects | Yes |
| USB | Yes |
| Computer Connectivity | USB |
| Phantom power | Yes |
| Type | Analog |
| Inputs - Mic Preamps | 4 |
| Inputs - Line | 6 |
| Inputs - Other | 2x RCA (stereo) |
| Outputs - Main | 2 x XLR |
| Outputs - Other | 2 x 1/4" (Monitor) |
| EQ Bands | 3-band (Channel), 2-band (Stereo) |
| EQ | 3-band EQ |
| Effects types | Reverb, Delay, Chorus |
| Faders | 10 |
| Headphone output | 1 x 1/4" |
| Main outputs | 2x XLR |
| Monitor outputs | 2 x 1/4" (Monitor) |
Covers essential safety guidelines for operation, including earthing, power sources, and cord routing.
Details environmental considerations, operational safety, and installation guidelines for the mixer.
Provides instructions for replacing the mains plug, including wire colour codes for safety.
Offers advice on preventing damage, proper storage, cleaning methods, and protecting hearing.
Details how to select effects, use the Bank LED, SEL and TAP buttons, and FX to AUX send.
Explains the Effects Return fader, Record/Listen switching, and Mute function for effects.
Lists and describes all 16 effect presets, including parameter adjustment details.
Covers headphone level, output, source selection, and hearing protection warnings.
Explains the ZED's USB 1.1 audio CODEC for computer connectivity and audio transfer.
Provides guidance on adjusting volume and device settings for Windows XP/Vista and Windows 7.
Guides users through connecting the ZED to a Mac and configuring it within Pro Tools.
Explains how to connect the ZED to a Windows PC and set up Pro Tools using ASIO4ALL.
To Next Page