Need help?Do you have a question about the ALLEN & HEATH iLive-R72 and is the answer not in the manual?
General| Brand | ALLEN & HEATH |
|---|---|
| Model | iLive-R72 |
| Category | Recording Equipment |
| Language | English |
Prevents cosmetic damage to equipment by avoiding heavy objects and scratching.
Protects equipment from dirt, dust, heat, vibration, and moisture.
Use soft brush and dry cloth; vacuum ventilation grilles.
Use original packing or flightcase for protection during transit.
Plan cable location to avoid strain and tripping hazards.
Do not remove modules while power is applied.
Heart of the digital audio system, 64x32 DSP, 10 card slots for input/output modules.
Similar to iDR10 but no card slots, receives audio via EtherSound network.
Controller with up to 44 faders, 4 layers, and 4 slot card frame for local I/O.
Standard locking Neutrik connector cables for connecting rack and surface.
Rack-mounted external power supply for redundant backup.
4-pin XLR gooseneck lamp with built-in dimmer.
Touring grade cases with wheels and brakes for protection.
Programmable remote controllers for system control.
PC/MAC software for system control and editing offline.
Largest fixed rack with 64 Mic/Line inputs and 32 XLR line outputs.
Standard fixed rack with 48 Mic/Line inputs and 24 XLR line outputs.
Mid-sized fixed rack with 32 Mic/Line inputs and 16 XLR line outputs.
Smallest fixed rack with 16 Mic/Line inputs and 8 XLR line outputs.
Biggest T Series surface with 28 faders, 4 layers.
Mid-sized T Series surface with 20 faders, 4 layers.
Smallest R Series surface with 12 faders, 6 layers.
Range of remote controllers with assignable switches, LEDs, and encoders.
Requires 2x CAT5 cables for AUDIO and CONTROL network connections.
Uses a single CAT5 cable for both AUDIO and CONTROL.
Uses a single CAT5 cable via ACE ports for audio and control.
Details default IP addresses and troubleshooting for network connectivity.
System requirements and network setup for iLive Editor software.
Connecting PL devices via CAT5 cable to the PL-Anet port.
Details the time taken for MixRack, Surface, and TouchScreen to become ready.
Fixed format audio interface for input/output connections local to the surface.
Details local inputs, outputs, and audio link for the T112 surface.
Details local inputs, outputs, and audio link for T80/R72 surfaces.
8x high-performance analogue input preamps for mic and line level signals.
8-channel module for up to 16 mic/line signals with dual input selection.
8x balanced line level outputs operating at +4dBu.
Module providing 8 digital inputs in 4 pairs, choice of AES, SPDIF, or optical.
Module providing 8 digital outputs in 4 pairs, AES, SPDIF, and optical available.
Module providing 16 outputs via ADAT, IDR Expander, Aviom, and HearBus formats.
Provides control interface, networking, and power status for the MixRack.
The DSP mix engine, handling audio signal processing and internal effects.
Handles audio clock, headphones, and interface for up to two digital audio networks.
Latest version for digital audio networking, with slots for option cards.
Controller module housing network and interface ports for the MixRack.
Provides digital audio port for interfacing with MixRack and other devices.
Older version supporting only EtherSound network option.
Newer version supporting various digital audio/networking cards.
Details on fitting and using the ACE point-to-point link card.
Covers ES V2 and ES V1 base cards for iLive networking.
Details on fitting and using the Mini Multi Out (MMO) digital output card.
Instructions for the MADI interface card for multi-channel audio networking.
iDR-8 and iDR-4 rack processors integrate easily with iLive via CAT5.
8-channel output expanders connectable to iLive for remote audio capability.
Programmable controllers interfacing via PL-Anet port for iLive and iDR systems.
PC/MAC application for controlling the iLive system via Ethernet.
18" gooseneck lamp with XLR connector and dimmer.
Tour grade Neutrik EtherFlex cable for EtherSound connections.
Optional rack-mounted unit for redundant power backup.
Touring grade flight cases for iLive systems.
Outlines terms for installation, operation, and repair under warranty.
To Next Page
