Need help?Do you have a question about the ALLEN & HEATH ML3000 and is the answer not in the manual?
General| Type | Analog Mixing Console |
|---|---|
| Faders | 100mm |
| Group Buses | 8 |
| Main Outputs | 2 |
| Signal to Noise Ratio | > 90 dB |
| Output Impedance | 75 Ω |
| EQ | 4-band EQ with 2 sweepable mids |
| Frequency Response | 20 Hz to 20 kHz |
| Input Impedance | 10 kΩ |
Read before proceeding. Includes cautions for electric shock and opening the unit.
Details frame sizes, inputs, outputs, groups, auxes, matrix, automation, and processing.
Details channel filters, mono/stereo EQ bands, frequencies, and gain.
Covers PSU details, dimensions, weights, and connector specifications.
Use clean mains, star point earthing, professional checks, and prevent induced interference.
Guides on setting input gain, matching levels, and using VCA groups for optimal performance.
Explains MIDI port functions, what it can and cannot control, and cable specs.
Details RS232 port use for software updates and PC interface.
Step-by-step instructions for saving/loading settings and troubleshooting errors.
Information about the PC utility for archiving settings and managing snapshots.
How to check version, load new software, reset settings, snapshot memories, or all data.
Details jumper settings for group/aux buss, aux matrix, VU meters, and CPU assignments.
To Next Page
