Qu Mixer Getting Started Guide 5 AP10025 iss1
2. Contents
1. Packed contents ................................................................................................................................. 4
2. Contents .............................................................................................................................................. 5
3. Introduction to the Qu Series .............................................................................................................. 6
3.1 Differences between the Qu models ......................................................................................... 7
4. Installation ........................................................................................................................................... 9
5. Rear Panel ......................................................................................................................................... 10
5.1 Connecting and powering up the mixer .................................................................................. 10
6. Front Panel ........................................................................................................................................ 11
7. Audio Signal Processing .................................................................................................................. 12
8. Wireless Control ................................................................................................................................ 13
9. Qu-Start ............................................................................................................................................. 14
9.1 Things to check before starting ............................................................................................... 14
9.2 Set a known starting point ....................................................................................................... 14
9.3 Prepare the mixer for your session .......................................................................................... 15
9.4 Set a starting point for processing and mix parameters ......................................................... 17
9.5 Save the settings ...................................................................................................................... 18
9.6 Mixing with Qu-16, Qu-24 and Qu-32 ...................................................................................... 19
9.7 Security and user access ........................................................................................................ 20
9.8 USB recording and playback .................................................................................................. 21
9.9 A few more functions ............................................................................................................... 22
10. Resetting the Mixer ........................................................................................................................... 23
10.1 Reset Mix Settings – A starting point for mixing ...................................................................... 23
10.2 System Hard Reset – Clear everything .................................................................................... 23
About this guide
This is the Getting Started Guide for the Allen & Heath Qu-16, Qu-24
and Qu-32 digital mixers.
For more information about Qu mixer setup and mixing functions
please refer to the Qu Mixer Reference Guide available for download
from the Allen & Heath website:
www.allen-heath.com
Please Note
This guide refers to Qu firmware V1.8. Please refer to the Allen &
Heath website for the latest version of firmware and this guide.
For information on the Qu-Pac, and the AR2412, AR84 and AB168
remote AudioRacks please refer to their user guides.
To Next Page
Loading...
