Need help?Do you have a question about the ALLEN & HEATH QU-SB and is the answer not in the manual?
General| Type | Digital Mixer |
|---|---|
| Channels | 32 |
| Mic Preamps | 16 |
| Outputs | 12 x XLR |
| Main Outputs | 2 x XLR |
| Aux Outputs | 10 x XLR |
| USB Audio Interface | 32 x 32 |
| Rackmountable | Yes |
| Sampling Rate | 48kHz |
| Phantom Power | Yes |
| iPad App | Yes |
| Built-in WiFi | No |
| Power Supply | Internal |
| Remote Control | Yes |
| Effects | 4 x Stereo FX Engines |
| EQ | 4-band Parametric EQ |
| Dynamic Processing | Gate, Compressor |
| Data I/O | Ethernet |
| USB | 1 x Type A, 1 x Type B |
| Computer Connectivity | USB |
| I/O Expansion Slots | 1 |
| Software | Qu-Drive, Qu-Pad |
Emphasizes reading safety instructions for user and operator safety.
Provides instructions on how to safely power the Qu mixer on and off.
Details the available processing blocks like Preamp, Gate, EQ, and Compressor for channels.
Explains how to access and adjust processing parameters using the Sel keys and Touch Screen.
Explains how to manage channel assignments, send levels, and routing configurations.
Describes the use of Mute and DCA Groups for controlling multiple channels simultaneously.
Explains how to assign and use DCA Groups for single-fader level control of multiple channels.
Details the Processing and Routing screens accessed via Sel keys for channel adjustments.
Explains how to store and recall complete mixer settings as Scene memories.
Explains the AMM for automatic level control of multiple microphones for speech.
Provides tips on setting up and optimizing the Automatic Mic Mixer.
Explains patching AudioRack input sockets to Qu input channels via dSNAKE.
Details patching dSNAKE remote audio outputs from any Qu mixer output source.
Describes patching USB audio outputs for Qu-Drive Stereo, Multitrack, and USB B streaming.
Provides step-by-step instructions for updating the mixer's operating firmware.
Details how the mixer streams audio and sends MIDI to Mac or Windows PCs via USB B.
How to reset mixer settings to factory defaults for a clean starting point.
Describes a full system reset to clear all settings, scenes, and user data.
To Next Page
