EasyManua.ls Logo

ALLEN & HEATH T SERIES AP6526 - Digital Processing, Performance, and Architecture

ALLEN & HEATH T SERIES AP6526
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
96 ALLEN&HEATH iLive Reference Guide AP6526 iss.3
iLive Digital inputs (8x channel = 4x stereo pairs):
Select one of three formats per pair:
AES3, SPDIF, Optical.
Sample rate conversion selectable on each pair.
iLive Digital outputs (8x channel = 4x stereo pairs):
Three formats simultaneously available:
AES3, SPDIF, Optical
Audio networking:
MixRack Port A and Port B
64 channel bi-directional EtherSound networks
Options – EtherSound or ACE (Allen & Heath Audio and Control over Ethernet)
Port A for surface/breakout audio (replaces multicore)
Port B option for system expansion (FOH/monitor split, sys-link, multitrack)
ES - Maximum CAT5 cable length 100m / 330 feet (depending on cable used)
ACE - Maximum CAT5 cable length 120m / 400 feet (depending on cable used)
Can work with third party optical fibre / dual redundant systems
Control (available on each MixRack and surface):
TCP/IP Ethernet – MixRack, Surface,
Integrated 3-port Ethernet switch
Maximum CAT5 cable length 100m / 330 feet
Can work with standard Ethernet optical fibre / dual redundant systems
MIDI (MixRack and Surface).
PL-Anet for A&H PL-Series controllers.
Digital signal processing module:
48kHz sampling
24-bit, 48-bit data in EQ processing
System latency < 2ms rack in to out, < 2.25ms surface in to out
System performance:
Frequency response 20-20kHz +0/-0.5dB
THD+N (1kHz, 25dB pad out, mid gain)
Level: +16dBu (-80dBu, 0.0015%)
THD+N (1kHz, 25dB pad out, unity gain)
Level: +16dBu (-81dBu, 0.0012%)
Channel separation > 95dB
Audio architecture:
Inputs can be assigned as mono or stereo
32 mixes assignable as:
Mono/stereo Groups
Mono/stereo internal FX sends
Mono/stereo Auxes
Main mix – M, LR, LCR, LCR+, LR+Sub, LCR+Sub, LR+M, LCR+M
Mono/stereo Matrix
Inserts assignable on every input and mix
Patchable channel direct outs and mix bus in/outs
Switchable mono/stereo PFL or AFL
Audio routing:
Input virtual patchbay
Output virtual patchbay
Port A and Port B patchbays
Insert patchbay
User pre/post send and direct out source options
Audio metering:
12-bar LED main channel/mix meters
Extensive metering on processing strip
Peak indication across fader layers
Dedicated PAFL meters
Dedicated meter mode

Table of Contents

Related product manuals