ALLEN & HEATH T SERIES AP6526 - Technical Specifications; System Format, Control, and Audio Interfaces

ALLEN&HEATH iLive Reference Guide AP6526 iss.3 95
Technical specification
Format:
Distributed dual network audio and TCP/IP control
Separate DSP and control surface
iLive = 4x surface sizes
T Series = 2x surface sizes
Up to 64x input channels
Up to 8x additional stereo FX returns
Up to 32x assignable mix buses
16 DCA groups
iLive iDR10 up to 10x 8 channel I/O modules in (80x sockets)
iLive Surface up to 4x 8 channel I/O modules in surface (32x sockets)
T Series has fixed I/O connections
Surface strips assignable as:
Channels, mix masters, DCA masters, PAFL masters
Analogue style one knob per function channel processing control
Surface control:
iLive-80 (20 faders, 4 layers = 80 assignable strips)
iLive-112 (28 faders, 4 layers = 112 assignable strips)
iLive-144 (36 faders, 4 layers = 144 assignable strips)
iLive-176 (44 faders, 4 layers = 176 assignable strips)
T80 (20 faders, 4 layers = 80 assignable strips)
T112 (28 faders, 4 layers = 112 assignable strips)
Multi-colour backlight LCD virtual ‘write-on’ strip and mix status
Control strips – fader, pan, MIX, MUTE, PAFL, SEL, LCD, meter
User assignable soft keys
Analogue style one knob per function channel control for instant access
Rotary controls with LED position display
Additional graphic view of parameters on built-in TouchScreen
Surface LED/LCD and dim controls
Surface lock function
Surface audio:
Interfaces to the rack via Port A network. 64 bi-directional audio:
iLive Port A = EtherSound
T Series Port A = ACE
PAFL monitor, Talkback, 32x local audio and 30x break in/out signals
iLive - built-in card frame for up to 4x optional 8 channel I/O modules (32x sockets)
T80 – 8x in (4trs, 2rca, 1spdif), 8x out (4trs, 2rca, 1spdif)
T112 – 16x in (8trs, 4rca, 2spdif), 12x out (8trs, 2rca, 1spdif)
Analogue mic/line inputs
Remote controlled preamp
Balanced female XLR, pin 2 hot
Impedance 2k ohm, >10k ohm (pad in)
Gain +10 to +65dB, -15 to +40dB (pad in)
Resolution 1dB steps
Pad 25dB
Maximum input +30dBu (pad in)
Noise EIN (150 ohm) -127dB
ADC 24-bit multi-bit delta sigma
108dB dynamic range
Analogue line outputs
Balanced male XLR, pin 2 hot
Output relay power up/down protection
Impedance: < 75 ohm
Nominal output: +4dBu
Maximum output: +22dBu
Residual output noise: -94dBu
DAC 24-bit multi-bit delta sigma.
116dB dynamic range.