Allen & Heath 36 XONE:3D User Guide
Setting Up Ableton Live Lite 5
5— Select the ‘1/2 (stereo)’, ‘3/4 (stereo)’
and ‘5/6 (stereo)’ options and de-select the
mono equivalents.
You must click ’OK’ for the changes to take
effect.
6— In Ableton, choose an audio track and
click on the ‘Audio To’ drop down menu and
select ‘EXT Out’.
7— Once EXT Out has been selected,
another drop down menu will appear—
this menu allows the selection of the
1/2, 3/4 and 5/6 outputs.
Output 1/2 maps to Channel 1 on the
Xone 3D (select the SC1-2 button).
Output 3/4 maps to Channel 1 on the
Xone 3D (select the SC1-2 button).
Output 5/6 maps to Channel 1 on the
Xone 3D (select the SC1-2 button).
Channel 4 on the Xone 3D will mirror
Channel1.
To Next Page
Loading...
Need help?
General
