2 XONE:62 Service Manual
Allen & Heath Technical Support
This service manual provides technical information for servicing the XONE:62. It refers to
both the original (VERSION 1) and the revised (VERSION 2) model XONE:62. Whilst we
believe the information presented to be reliable we do not assume responsibility for
inaccuracies. We also reserve the right to make changes in the interest of further product
development.
For further technical support please contact us at Allen & Heath. The contact details are
printed below. To help us provide the most efficient service please quote the console
serial number in any communication regarding this product. Our Internet site provides
further information on our full product range as well as contact details for our distribution
network.
This product complies with the European Electromagnetic
Compatibility directives 89/336/EEC & 92/31/EEC and the
European Low Voltage Directives 73/23/EEC &
93/68/EEC.
This product has been tested to EN55103 Parts 1 & 2 1996 for use in
Environments E1, E2, E3, and E4 to demonstrate compliance with the
protection requirements in the European EMC directive 89/336/EEC.
During some tests the specified performance figures of the product
were affected. This is considered permissible and the product has
been passed as acceptable for its intended use. Allen & Heath has a
strict policy of ensuring all products are tested to the latest safety and
EMC standards. Customers requiring more information about EMC
and safety issues can contact Allen & Heath.
NOTE: Any changes or modifications to the console not approved by
Allen & Heath could void the compliance of the console and therefore
the users authority to operate it.
XONE:62 Service Manual AP3842 Issue 3
Copyright © 2004 Allen & Heath. All rights reserved
Kernick Industrial Estate, Penryn, Cornwall, TR10 9LU, UK
Web: http://www.allen-heath.com
Email: sales@allen-heath.com
support@allen-heath.com
spares@allen-heath.com
To Next Page
Loading...
Need help?
General
