Installation Instructions
POINT I/O Dual Port EtherNet/IP
Adapter
Catalog numbers 1734-AENTR, 1734-AENTRK, Series C
Catalog numbers with the suffix ‘K’ are conformal coated and their specifications are the
same as non-conformal coated catalogs.
Table of Contents
Topic Page
Important User Information 2
Environment and Enclosure 3
Preventing Electrostatic Discharge 3
North American Hazardous Location Approval 4
European Hazardous Location Approval 4
About the Adapter 6
Before You Begin 7
Install the Adapter 8
Thumbwheel Settings 9
Set the Chassis Size 10
Set the Network Address 10
Replace the Adapter 12
Wire the Adapter 14
Interpret Status Indicators 16
Specifications 18
Additional Resources 23
To Next Page
Need help?
General
