Need help?Do you have a question about the Allen-Bradley 1734-ADN and is the answer not in the manual?
General| Series | POINT I/O |
|---|---|
| Communication Protocol | DeviceNet |
| Number of I/O Modules Supported | 8 |
| Number of Ports | 1 |
| Operating Voltage | 24V DC |
| Shock | 30 g |
| DeviceNet Baud Rate | 125, 250, 500 kbps |
| Mounting Type | DIN Rail |
| Product Type | Adapter |
| Input Voltage | 20.4 - 28.8V DC |
| Operating Temperature | -20 to 60 °C |
| Storage Temperature | -40 to 85 °C |
| Relative Humidity | 5 to 95% (non-condensing) |
| Vibration | 10 to 500 Hz |
| Weight | 0.2 kg |
Describes the physical installation steps for the adapter onto a DIN rail.
Explains the wiring connections for the adapter and its network designations.
Describes how to use the adapter within a POINT I/O system and initial tasks.
Introduces Auto Start Mode for easy adapter installation and operation.
Describes how to access and interpret diagnostic tables for network flow.
Explains the benefits of using Auto Start Mode for quick system setup.
Describes the physical installation steps for the adapter onto a DIN rail.
Explains the wiring connections for the adapter and its network designations.
Details the steps to use RSNetWorx for DeviceNet software to configure the adapter.
Describes the use of RSNetWorx for DeviceNet to configure the adapter online or offline.
Details the steps to add the scanner to the network using RSNetWorx for DeviceNet.
Explains how to configure the scanner for use with I/O modules.
Guides on taking the adapter online after setting configuration parameters.
Describes the use of RSNetWorx for DeviceNet to configure the adapter online or offline.
Explains how to configure the adapter for use with master DeviceNet devices.
Guides on taking the adapter online after setting configuration parameters.
Explains how to use the adapter's status indicators to diagnose issues.
Offers operational guidelines to ensure proper usage of the 1734-ADN(X) adapter.
Lists key technical specifications for the adapter, including I/O capacity and current requirements.
Details the power supply requirements and input voltage ratings for the adapter.
Reviews rules for using the 1734-ADNX and explains MAC ID parameters.
Guides on browsing the Subnet to view network configuration and devices.
Shows how to associate and switch between different DeviceNet networks.
Presents specific rules and guidelines for operating the 1734-ADNX.
Provides default data mapping information for I/O messages sent to and received from modules.
To Next Page