Allen-Bradley 1756-EN2T User Manual

ControlLogix EtherNet/IP Module 15
Rockwell Automation Publication 1756-IN603C-EN-P - April 2010
Configure the Module
Follow these steps to configure the module.
1. In RSLogix 5000 software, from the Controller Organizer, select New
Module.
2. Select the module you want to configure.
For more configuration information, refer to the EtherNet/IP Modules in
Logix5000 Control Systems User Manual, publication ENET-UM001
. View or
download this publication at http://www.rockwellautomation.com/literature
.
Apply Chassis Power
31593-M

Allen-Bradley 1756-EN2T Specifications

General

Brand	Allen-Bradley
Model	1756-EN2T
Category	Control Systems
Language	English