Installation Instructions
ControlLogix EtherNet/IP Module
Catalog Number 1756-EN2F
About This Publication
Use this publication as a guide to install the ControlLogix EtherNet/IP Fiber
Module.
Topic Page
About the Module 6
Before You Begin 7
Determine Module Slot Location 8
Install the Module 11
Connect the Module to the EtherNet/IP Network 13
Program the Module via the USB Port 14
Configure the Module 15
Apply Chassis Power 15
Check Power Supply and Module Status 16
Install or Remove the Module Under Power 17
Interpret the Status Indicators 19
Specifications 21
To Next Page
Need help?
General
