Need help?Do you have a question about the Allen-Bradley 1756-L55 and is the answer not in the manual?
General| Number of Tasks | 32 |
|---|---|
| Shock | 30 g |
| Controller Type | ControlLogix |
| Series | ControlLogix |
| I/O Capacity | 128, 000 I/O |
| Communication | EtherNet/IP, ControlNet, DeviceNet |
| Communication Ports | RS-232 |
| Operating Temperature | 0…60 °C (32…140 °F) |
| Relative Humidity | 5 to 95% non-condensing |
Details the steps to start and access the SRM configuration tool via RSLinx software.
Guides users on verifying the SRM configuration tool revision for compatibility with the redundancy system.
Explains how to use RSLinx software to manually initiate and monitor a switchover.
Addresses decisions before editing online: retaining test edits, finalizing edits, and memory allocation.
Details the process of enabling redundancy for ControlLogix controllers in RSLogix 5000 software.
Outlines specific configuration choices for successful redundancy system communications, including I/O and tags.
Provides methods to estimate the time required for crossloading program data between controllers.
Explains how the redundancy system ensures bumpless switchovers and manages data crossloads.
Shows how to write code to determine the system's redundancy status using GSV instructions.
Guides users through scheduling new or updating existing ControlNet networks for redundancy.
Provides procedures to find and fix causes of unplanned switchovers or loss of synchronization.
Offers steps to resolve issues when a secondary chassis fails to synchronize.
Explains how to interpret SRM event log entries to understand system switchovers or synchronization failures.
Addresses slow HMI updates or communication issues by adjusting system overhead time slices.
Details the procedure for replacing CNB/D/D modules with Series E modules while the system is online.
To Next Page
