Need help?Do you have a question about the Allen-Bradley 2080-IF2 and is the answer not in the manual?
General| Type | Analog Input Module |
|---|---|
| Analog Inputs | 2 |
| Input Type | Voltage or Current |
| Power Supply | 24V DC |
| Current Draw @ 24V DC | 50 mA |
| Operating Temperature | -20 to 60 °C |
| Weight | 0.2 kg |
| Resolution | 16 bits |
| Input Range | 0...20mA, 4...20mA |
| Input Voltage Range | +/-10V |
| Input Current | 0...20mA, 4...20mA |
| Accuracy | +/-0.1% of full scale |
| Dimensions | 90mm x 87mm x 35mm |
Details on 12/24V DC Sink/Source input and AC/DC relay output modules.
Covers non-isolated unipolar voltage/current analog input/output modules.
Information on Thermocouple, RTD, Memory Backup, Trimpot, and HSC modules.
Details on RS232/485 Serial and DeviceNet communication modules.
Step-by-step instructions for physically installing plug-in modules.
General wiring practices and pin assignments for plug-in modules.
Specific wiring advice for the 2080-TC2 Thermocouple/RTD module.
Specific wiring advice for the 2080-RTD2 Thermocouple/RTD module.
Methods for browsing the DNET20 plug-in via RSLinx.
Steps to update the firmware of the 2080-DNET20 plug-in.
Guide to configuring plug-ins using Connected Components Workbench.
Lists error codes for plug-in modules and recommended actions.
To Next Page