Need help?Do you have a question about the Allen-Bradley 2080-IF4 and is the answer not in the manual?
General| Type | Analog Input Module |
|---|---|
| Analog Inputs | 4 |
| Resolution | 16-bit |
| Input Type | Voltage/Current |
| Input Impedance Current | 250 Ω |
| Power Supply Voltage | 24 VDC |
| Current Input Range | 4 to 20 mA |
| Accuracy | ±0.1% of full scale |
| Operating Temperature | -20 to 60 °C |
| Storage Temperature | -40 to 85 °C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Power Consumption | 1.5W |
| Voltage Input Range | -10 to 10 V |
| Input Impedance Voltage | 1 MΩ |
Defines WARNING, ATTENTION, SHOCK HAZARD, BURN HAZARD, and IMPORTANT messages.
Categorizes plug-ins into Digital, Analog, Specialty, and Communication types.
Provides pinout details for 12-pin and 8-pin terminal blocks and wiring considerations.
Explains the purpose and parameters of UDFBs like RA_HSCPlugIn for HSC configuration.
Covers network setup, wiring requirements, and specifications for DeviceNet.
Introduces UDFBs for controlling DeviceNet scanners and nodes.
Guides users on configuring plug-ins using Connected Components Workbench.
Provides steps for updating the firmware of the 2080-DNET20 plug-in.
Lists specific error codes for plug-in modules and recommended recovery actions.
To Next Page