Need help?Do you have a question about the Allen-Bradley 2080-OF2 and is the answer not in the manual?
General| Number of Outputs | 2 |
|---|---|
| Resolution | 12-bit |
| Product Type | Output Module |
| Output Type | Analog |
| Output Range | 0-10V DC or 0-20mA |
| Power Supply | 24V DC |
| Enclosure Type | Open-style |
Highlights critical safety warnings, hazards (WARNING, ATTENTION, SHOCK, BURN), and precautions for equipment use.
Introduces the 2080-MOT-HSC module and lists its key technical specifications and filter settings.
Explains rate calculation methods and introduces UDFBs for HSC configuration.
Explains how to configure node addresses and baud rates using DeviceNet switches.
Introduces and details various User Defined Function Blocks for DeviceNet communication.
Explains sending explicit messages via pass through and lists DeviceNet plug-in error codes.
Provides a step-by-step guide for using the DeviceNet plug-in.
Guides users on adding and configuring plug-ins using Connected Components Workbench software.
Explains how to browse the DNET20 plug-in using RSLinx and perform firmware upgrades.
Provides a quickstart project example for the DeviceNet plug-in, demonstrating output control.
Offers quickstart guides for configuring and using HSC plug-in User Defined Function Blocks.
To Next Page