Need help?Do you have a question about the Allen-Bradley 2080-SERIALISOL and is the answer not in the manual?
General| Series | 2080 |
|---|---|
| Isolation | Yes |
| Mounting Type | DIN Rail |
| Baud Rate | 1200 to 115200 bps |
| Power Supply | 24V DC |
| Isolation Voltage | 1500V AC |
| Dimensions | 90 mm |
| Communication Ports | 1 |
Defines WARNING, ATTENTION, SHOCK HAZARD, BURN HAZARD, and IMPORTANT notes.
Details the capabilities, input points, and technical specifications of the HSC module.
Introduces UDFBs for configuring and using the HSC plug-in functionality.
Lists error codes for plug-in modules and recommended recovery actions.
Step-by-step guide to configuring plug-ins using Connected Components Workbench.
Explains methods to browse plug-ins directly or via controller pass-through.
Guide on how to update firmware for the 2080-DNET20 plug-in.
Demonstrates a project to control CompactBlock LDX outputs using the DNET plug-in.
Guides on using UDFBs to configure and use the HSC plug-in.
To Next Page