Need help?Do you have a question about the Allen-Bradley 2080-IQ4 and is the answer not in the manual?
General| Product Type | Digital Input Module |
|---|---|
| Series | Micro800 |
| Number of Inputs | 4 |
| Input Type | Sinking/Sourcing |
| Input Voltage | 24V DC |
| Shock | 30 g |
| Mounting | DIN Rail |
| Programming Software | Connected Components Workbench |
| Operating Temperature | -20°C to 55°C |
| Storage Temperature | -40°C to 85°C |
| Relative Humidity | 5 to 95% (non-condensing) |
| Vibration | 5 g |
| Dimensions (H x W x D) | 90 x 45 mm |
| Connection Type | Screw Terminal |
| Compatibility | Micro800 series controllers |
Details the high-speed counter plug-in module capabilities.
Details the DeviceNet scanner plug-in module.
Provides instructions for physically installing the plug-in module into the controller.
Guides users on how to connect the plug-in modules, including pin assignments.
Provides detailed specifications for the high-speed counter functionality.
Explains the User Defined Function Blocks (UDFBs) for configuring the HSC.
Guides on configuring the DeviceNet network and importing UDFBs.
Details the physical wiring requirements for DeviceNet networks.
Guides on configuring plug-ins using Connected Components Workbench software.
Explains how to browse the DeviceNet plug-in using RSLinx software.
Provides steps to update the firmware of the 2080-DNET20 plug-in module.
Demonstrates a quickstart project using the 2080-DNET20 plug-in.
Step-by-step guide for setting up and wiring the plug-in.
Details the configuration steps for DeviceNet devices and UDFBs.
Lists error codes specific to Micro800 plug-in modules and recommended actions.
To Next Page