Need help?Do you have a question about the Allen-Bradley 2080-RTD2 and is the answer not in the manual?
General| Manufacturer | Allen-Bradley |
|---|---|
| Product Type | RTD Input Module |
| Series | Micro800 |
| Input Channels | 2 |
| Input Type | RTD |
| Resolution | 0.1 °C |
| Power Supply | 24V DC |
| Power Consumption | 1.5 W |
| Compatibility | Micro800 controllers |
| Temperature Range | -200°C to 850°C |
| Storage Temperature | -40°C to 85°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| RTD Type | PT100, PT1000 |
Provides critical safety warnings, hazards, and important notes for using equipment.
Provides pin designations and wiring information for 12-pin terminal blocks.
Details pin designations for 8-pin terminal block modules.
Covers module capabilities, input points, and counter specifications.
Explains UDFBs like RA_HSCPlugIn for counter configuration and data retrieval.
Details network setup, baud rates, trunk/drop line lengths, and node addresses.
Step-by-step guide to adding and configuring plug-ins in Connected Components Workbench.
Guides on how to flash upgrade firmware for the 2080-DNET20 plug-in.
Lists common error codes for plug-ins and recommended troubleshooting actions.
To Next Page