Rockwell Automation Publication 2080-UM005E-EN-E - March 2018 97
Chapter
9
Using microSD Cards
This chapter provides a description of microSD card support on
Micro820 controllers.
The last section provides quickstart projects for the data log and recipe functions.
Overview
Micro820 controllers support microSD cards for the following purposes:
• Project backup and restore
• Data log and Recipe
Topic Page
Overview 97
Project Backup and Restore 98
Backup and Restore Directory Structure 99
Powerup Settings in ConfigMeFirst.txt 100
General Configuration Rules in ConfigMeFirst.txt 102
ConfigMeFirst.txt Errors 102
Data Log 106
Recipe 111
Quickstart Projects for Data Log and Recipe Function Blocks 115
For optimum performance, the microSD card should not be more than
90% full. Regularly check available space on your microSD card and
ensure that the card is exclusively used for the Micro800 controller and
no unnecessary files are present. Regularly delete old data log files and
directories.
Do not remove the microSD card or power down while operations such as
upload, download, delete, search, backup and restore are ongoing to
prevent data loss. A blinking SD status LED indicates that these
operations are ongoing.
The SD status LED will not blink when flash upgrading the firmware from
the microSD card.
To prevent data loss, recipe and data log function blocks must indicate
Idle status before microSD card is removed.
To Next Page
Loading...