52 Rockwell Automation Publication 2080-UM005E-EN-E - March 2018
Chapter 4 Wire Your Controller
Wiring Analog Channels
Analog input circuits can monitor voltage signals and convert them to serial
digital data as shown in the following illustration.
Analog input to sensors
ATTENTION: Analog inputs and outputs are not isolated.
Sensor 3
(V) Voltage
Sensor 2
(V) Voltage
Sensor 1
(V) Voltage
Sensor 0
(V) Voltage
-DC24
+DC10 I-00
I-01
I-02
I-03
COM0
I-04
I-05
I-08
I-07
123456789101112
I-10
I-09
NU
I-11
13 14 15 16
I-06
1234
1234
46254
Note: Terminal block to wire
commons is not included in
Micro800 package.
The “-DC24” terminal is the analog ground connection for analog inputs (I-00 to I-03).
To Next Page
Loading...