64 Rockwell Automation Publication 2080-UM005E-EN-E - March 2018
Chapter 5 Communication Connections
Configure Serial Port
You can configure the Serial Port driver as CIP Serial, Modbus RTU, ASCII or
choose Shutdown through the Controller Configuration tree in Connected
Components Workbench software.
By default, when a Micro820 controller is added to the Project Organizer in
Connected Components Workbench, Remote LCD parameters are configured
to overwrite serial port settings.
To edit serial port settings, go to the Remote LCD configuration page and
uncheck the Configure Serial Port for Remote LCD option button.
To Next Page
Loading...