Rockwell Automation Publication 2080-UM005E-EN-E - March 2018 119
Using microSD Cards Chapter 9
7. Assign the variables to the DLG input and output parameters as follows:
Note: For CfgID input parameter, you can choose a predefined variable by
choosing from the Defined Words in Connected Components Workbench. To
do so, click the CfgID input box. From the Variable Selector window that
appears, click the Defined Words tab and choose from the list of defined words
(for example, DSET1 which corresponds to DSET1 in your recipe
configuration). See the following screenshot.
To Next Page
Loading...