154 Rockwell Automation Publication 2080-UM005E-EN-E - March 2018
Appendix C Quickstarts
On Micro820 controllers, users can use flash update their controllers through the
Ethernet port, in addition to the USB of the 2080-REMLCD.
To begin, launch the Connected Components Workbench software:
1. In the menu, select Device -> Update Firmware -> Upgrade or
Downgrade...
Alternatively, in the Project Organizer, right-click the controller and select
Update Firmware -> Upgrade or Downgrade...
2. If your project does not have a connection path to the controller, the
Connection Browser dialog appears. Select your controller, then click OK.
3. In the Upgrade or Downgrade Firmware dialog box, select the desired
Target Revision to flash update the controller.
To successfully flash update your controller over USB, connect only one
controller to your computer, and do not perform the flash update in a
virtual machine such as VMware.
To Next Page
Loading...