Rockwell Automation Publication 2080-UM005E-EN-E - March 2018 167
Quickstarts Appendix C
2. The Change Controller Password dialog appears. Enter Old Password,
New Password and confirm the new password.
3. Click OK.
The controller requires the new password to grant access to any new session.
Clear Password
With an authorized session, you can clear the password on a target controller
through the Connected Components Workbench software.
1. On the Device Details toolbar, click Secure button. Select Clear Password.
2. The Clear Password dialog appears. Enter Password.
3. Click OK to clear the password.
The controller will require no password on any new session.
To Next Page
Loading...