Bulletin 2097 AC Line Filters 3
Publication 2097-IN003D-EN-P - November 2011
Before You Begin
For general guidelines when laying out your panel and mounting your AC line filter, refer to the
System Design for Control of Electrical Noise Reference Manual, publication GMC-RM001.
For guidelines specific to your application, refer to Additional Resources
page 8 for the user
manual.
ATTENTION: To avoid personal injury or damage to equipment due to hazardous voltages, follow
these guidelines when installing your AC line filter. NEC and local regulations always take
precedence.
• Disconnect mains power prior to installation.
• Verify that the rated voltage is compatible with the local supply voltage.
• Connect the earth ground connection first when making connections.
Allen-Bradley 2097-F1
To Next Page
Loading...
