Need help?Do you have a question about the Allen-Bradley 5069-IY4 and is the answer not in the manual?
General| Input Type | Analog Input |
|---|---|
| Number of Channels | 4 |
| Communication | EtherNet/IP |
| Power Dissipation | 1.8 W |
| Manufacturer | Rockwell Automation |
| Product Type | I/O Module |
| Series | 5069 |
| Input Voltage Range | 0 to 10 V |
| Current Input Range | 0...20mA, 4...20mA |
| Resolution | 16 bits |
| Isolation Voltage | 50V continuous |
| Enclosure Type Rating | IP20 |
| Operating Temperature | 0 to 60 °C |
| Storage Temperature | -40°C to 85°C (-40°F to 185°F) |
| Relative Humidity | 5% to 95% non-condensing |
| Dimensions (H x W x D) | 118 x 36 x 90 mm |
Essential safety information and hazard alerts for product operation.
Outlines the minimum components required for building a 5069 Compact I/O system.
Steps for creating and downloading configuration data for analog I/O modules.
Configures module behavior when the owner-controller connection breaks.
How output modules send fault and status data via module tags.
Methods to add modules to a Logix Designer project via Discover Modules or New Module.
Specific configuration categories for the 5069-IF8 module.
Specific configuration categories for the 5069-IY4 module.
Specific configuration categories for the 5069-OF4 module.
Specific configuration categories for the 5069-OF8 module.
Procedures for calibrating input modules using low and high signal references.
Step-by-step guide for calibrating an IF8 module using voltage input.
Step-by-step guide for calibrating an IY4 module using RTD input.
Procedures for calibrating output modules using a digital multimeter.
Step-by-step guide for calibrating an OF8 module using voltage output.
Describes the Module (MOD) Status Indicator for all 5069 Compact I/O analog I/O modules.
Details the I/O Status indicators for 5069 Compact I/O analog input modules.
Details the I/O Status indicators for 5069 Compact I/O analog output modules.
Explains how Logix Designer indicates fault conditions for troubleshooting.
Monitors module status and fault information within Logix Designer properties.
Lists configuration, input, and output tags specific to the 5069-IF8 module.
Lists configuration, input, and output tags specific to the 5069-IY4 module.
Lists configuration, input, and output tags for 5069-OF4 and 5069-OF8 modules.
To Next Page