Do you have a question about the Allen-Bradley 5069-IB16 and is the answer not in the manual?
Brand | Allen-Bradley |
---|---|
Model | 5069-IB16 |
Category | I/O Systems |
Language | English |
Details controller and software compatibility requirements for digital I/O modules.
Describes the various Compact 5000 I/O digital module types and their descriptions.
Details options to secure access to Logix 5000 controller and I/O modules.
Explains how to use Logix Designer for module configuration, monitoring, and troubleshooting.
Reduces the possibility of using the wrong device by comparing project and installed device attributes.
Lists the different types of Compact 5000 I/O digital input modules available.
Explains how to increase transition time for input points to improve noise immunity.
Lists the different types of Compact 5000 I/O digital output modules available.
Monitors for the loss of field power, that is, power on an SA power bus.
Detects when a wire is disconnected from the output or a missing load.
Helps prevent damage to the output from excessive current.
Prevents damage to the output from excessive heat due to high current.
Configures module behavior when a connection fault occurs between owner-controller and output module.
Describes features available on Compact 5000 I/O safety input modules (5069-IB8S, 5069-IB8SK).
Describes features available on Compact 5000 I/O safety output modules (5069-OBV8S, 5069-OBV8SK).
Explains using the 5069-ARM module to reserve a slot in the system.
Details creating new local or remote Compact 5000 I/O safety modules.
Explains common configuration categories for safety modules.
Allows inhibiting modules and configuring connection over EtherNet/IP.
Lets you set RPI rate and Connection Reaction Time Limit for safety modules.
Provides procedures for replacing safety modules on a CIP Safety network.
Describes the Module (MOD) Status indicator on Compact 5000 I/O digital modules.
Details the status indicators for Compact 5000 I/O safety input modules.
Details the status indicators for Compact 5000 I/O safety output modules.
Explains how Logix Designer indicates fault conditions and provides troubleshooting steps.
Provides example wiring diagrams for 5069-IB8S/IB8SK safety input modules.
Provides example wiring diagrams for 5069-OBV8S/OBV8SK safety output modules.
Lists calculated safety data (PFD, PFH, MTTF) for safety input modules.
Lists calculated safety data (PFD, PFH, MTTF) for safety output modules.