Need help?Do you have a question about the Allen-Bradley 5069-OF8 and is the answer not in the manual?
General| Module Type | Analog Output |
|---|---|
| Category | I/O Systems |
| Manufacturer | Allen-Bradley |
| Number of Outputs | 8 |
| Resolution | 16-bit |
| Output Type | Voltage |
| Current Range | 0-20mA, 4-20mA |
| Module Location | On chassis |
| Enclosure | Open |
| Compatibility | CompactLogix 5380, 5580 Controllers |
Details on building a 5069 Compact I/O system, including adapter requirements.
Details restrictions on module operations to ensure secure system function.
Configurable alarms that alert when limits are exceeded on each channel.
Configures module behavior and output state during connection faults.
Steps to add a new module to the Logix Designer project.
Overview of common configuration categories applicable to all analog I/O modules.
Parameters defining the module, including series, revision, keying, and connection.
Considerations before starting module calibration.
Procedure for calibrating input modules using low and high signal references.
Procedure for calibrating output modules using a multimeter.
Explains the Module (MOD) status indicator and its states.
How Logix Designer indicates and aids in troubleshooting fault conditions.
Monitoring module status and fault details within Logix Designer properties.
Defines configuration, input, and output tags for the 5069-IF8 module.
Defines configuration, input, and output tags for the 5069-IY4 module.
Defines configuration, input, and output tags for the 5069-OF4/OF8 modules.
To Next Page