Allen-Bradley Compact 5000 Series User Manual

Compact 5000 I/O Digital Modules
Catalog Numbers 5069-IA16, 5069-IB8S, 5069-IB8SK, 5069-IB16, 5069-IB16F, 5069-IB16K, 5069-IB6F-3W, 5069-OA16,
5069-OB8, 5069-OBV8S, 5069-OBV8SK, 5069-OB16, 5069-OB16F, 5069-OB16K, 5069-OW4I, 5069-OW16, 5069-OX4I
User Manual
Original Instructions

Allen-Bradley Compact 5000 Series Specifications

General

Category	I/O Systems
Manufacturer	Allen-Bradley
Power Supply	24V DC
Mounting	DIN Rail
Modularity	Modular
Shock Resistance	30 g
I/O Type	Digital, Analog, Specialty
Communication Protocols	EtherNet/IP
Maximum I/O Points	Varies by module
I/O Types Supported	Digital, Analog, Motion, Communication
Relative Humidity	5% to 95% (non-condensing)
Vibration Resistance	5g @ 10-500 Hz
Series	Compact 5000 Series

Summary

Chapter 1 Digital Module Operation in a Control System

Controller and Software Compatibility

Explains compatibility between controllers and digital I/O modules.

Local and Remote I/O Module Usage

Powering Compact 5000 I/O Modules

Describes the different power types received by Compact 5000 I/O digital modules.

Safety Module Power Requirements

Outlines specific power requirements for safety modules in a system.

Module Configuration and Connections

Explains the process of creating, configuring, and connecting modules.

Input and Output Module Operations

Safety Module Considerations

Highlights crucial factors for safety module suitability and certification.

Safety Precautions and Safe State

Lists essential precautions and defines safe states for safety modules.

Chapter 3 Input Module Features

Module Health and Fault Reporting

Pulse Latching and Field Power Loss Detection

Short Circuit Protection and Thermal Shutoff

Explains protection mechanisms against short circuits and overheating.

Chapter 5 Safety Module Features

Safety Input Module Features

Describes features available on Compact 5000 I/O safety input modules.

Safety Output Module Features

Details features available specifically for safety output modules.

Safety Module Fault and Status Reporting

Chapter 7 Configure and Replace Safety Modules

Creating New Safety Modules

Editing Safety Module Configuration

Configuring Safety Input and Output Points

Replacing Safety Modules and Setting SNN

Guidance on replacing safety modules and manually setting SNN.

Resetting Safety Modules to Out-of-Box Configuration

Replacing a Module in a Logix 5000 System

Covers conditions and actions for replacing modules in a Logix system.

Appendix A Troubleshoot Your Module

Module Status Indicators Overview

Safety Input Module Status Indicators

Explains SA and I/O status indicators for safety input modules.

Safety Output Module Status Indicators

Explains SA and I/O status indicators for safety output modules.

Troubleshooting with Logix Designer Application

Module and Point Diagnostics

InternalFault on Safety Output Modules

Lists conditions triggering InternalFault on safety output modules.

Appendix C Application and Wiring Examples for Safety Modules

IB8S/IB8SK Module Wiring Diagrams

Provides example wiring diagrams for IB8S/IB8SK safety input modules.

OBV8S/OBV8SK Module Wiring Diagrams

Provides example wiring diagrams for OBV8S/OBV8SK safety output modules.

Bipolar and Sourcing Mode Wiring

Safety Module Wiring Faults

Appendix D Safety Data for Safety Modules

Safety Input Module Safety Data

Lists safety data (PFD, PFH) for safety input modules.

Safety Output Module Safety Data

Lists safety data (PFD, PFH) for safety output modules.