Allen-Bradley powerflex 700 Technical Data

PowerFlex 700 Technical Data
20B-TD001F-EN-P 39
810 Volt DC Input Protection Devices
932 Volt DC Input Protection Devices
Notes
(1)
Drive frames 0…4 temperature rating is for NEMA/UL Type Open. The adhesive top label must be removed to operate drive at this temperature. Frames 5 & 6 do not have a top label.
(2)
The power source to common bus inverters must be derived from AC voltages 600V or less, as defined in NFPA70; Art 430-18 (NEC). Battery supplies or MG sets are not included. The
following devices were validated to break current of the derived power DC Bus.
Disconnects: Allen-Bradley Bulletin 1494, 30-400A; 194, 30-400A; or ABB OESA, 600 & 800A; OESL, all sizes.
Fuses: Bussmann Type JKS, all sizes; Type 170M, Case Sizes 1, 2 and 3, or Ferraz Shawmut Type HSJ, all sizes. For any other devices, please contact the factory.
(3)
Drives have dual current ratings; one for normal duty applications, and one for heavy duty applications. The drive may be operated at either rating.
(4)
UL Type 12/IP54 (flange mount) heatsink ambient temperature rating is 40 °C/ambient of unprotected drive portion (inside enclosure) is 55 °C. The ambient temperature for the UL Type 12/
IP54 stand-alone drives is 40 °C.
(5)
Also applies to “P” voltage class.
(6)
Also applies to “J” voltage class.
(7)
Must remove top label and vent plate, drive enclosure rating will be IP00, NEMA/UL Type Open.
(8)
Two 630A Bussmann 170M6608 can also be used.
(9)
Two 700A Bussmann 170M6611 can also be used.
(10)
Bussmann or equivalent.
Drive Catalog
Number
Frame
Hp Rating
PWM
Freq.
Temp.
(1)
DC Input
Ratings Output Amps
Fuse
Non-Time
Delay Fuse
(2)
ND HD kHz °C Amps Cont. 1 Min. 3 Sec.
810 Volt DC Input
20BE1P7 0 1 0.75 4 50 1.5 1.7 2 2.6 3 JKS-3
20BE2P7
0 2 1.5 4 50 2.4 2.7 3.6 4.8 6 JKS-6
20BE3P9 0 3 2 4 50 3.5 3.9 4.3 5.9 6 JKS-6
20BE6P1
0 5 3 4 50 6.2 6.1 6.7 9.2 10 JKS-10
20BE9P0 0 7.5 5 4 50 9.1 9 9.9 13.5 15 HSJ15
20BE011
0 10 7.5 4 50 11.5 11 13.5 18 20 HSJ20
20BE017 1 15 10 4 50 18 17 18.7 25.5 30 HSJ30
20BE022 2 20 15 4 50 23.6 22 25.5 34 40 HSJ40
20BE027 2 25 20 4 50 29 27 33 44 50 HSJ50
20BE032 3 30 25 4 50 34.3 32 40.5 54 60 HSJ60
20BE041 3 40 30 4 50 43.9 41 48 64 70 HSJ70
20BE052 3 50 40 4 50 55.7 52 61.5 82 90 HSJ90
20BE062 4 60 50 2 50 68 62 78 104 125 HSJ125
20BT099
(3)
5 100 – 2 40 108.6 99 109 126 150 HSJ150
– 75 2 40 84.5 77 116 138 150 HSJ150
20BT144
(3)
6 150 – 2 50 158 144 158 216 250 HSJ250
– 125 2 50 137.1 125 188 250 250 HSJ250
Drive Catalog
Number
Frame
kW Rating
PWM
Freq.
Temp.
(1)
DC Input
Ratings Output Amps
Fuse
Non-Time
Delay Fuse
(2)
ND HD kHz °C Amps Cont. 1 Min. 3 Sec.
932 Volt DC Input
20BW052
(3)
5 45 – 2 50
(4)
58.2 52 57 78 100 170M3691
– 37.5 2 50
(4)
46.9 46 69 92 100 170M3691
20BW098
(3)
590 – 2 50
(4)
110.7 98 108 127 160 170M3693
–752 50
(4)
92.3 82 123 140 160 170M3693
20BW142
(3)
6 132 – 2 50
(4)
162.2 142 156 213 250 170M3695
– 110 2 40
(4)
134.9 119 179 238 315 170M3696

Allen-Bradley powerflex 700 Specifications

General

Series	PowerFlex 700
Category	AC Drive
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC
Enclosure	Type 1
Control Method	Sensorless Vector
Communication	EtherNet/IP, ControlNet, DeviceNet, PROFIBUS DP, Modbus