Allen-Bradley powerflex 700 - Page 70

PowerFlex 700 Technical Data
70 20B-TD001F-EN-P
Frame 10 Flange Mount Cutout – DC Input
553.5 (21.79)
355.6 (14.00)
152.4
(6.00)
22.9
(0.90)
52.1 (2.05)
279.4 (11.00)
hole spacing,
5 places,
both sides
254.0 (10.00)
hole spacing
5 places,
both sides
508.0 (20.00)
38.1
(1.50)
152.4
(6.00)
152.4
(6.00)
32.3 (1.27)
39.9 (1.57)
7.6 (0.30)
1588.5
(62.54)
Holes are for M6 self tapping screws.
381.0 (15.00)
See Detail
Inverter Converter
37.8
(1.49)
66.5 (2.62)
Dimensions are in Millimeters and (Inches)
22.9 (0.90)
58.6 (2.31)
12.7 (0.50)
1471.9
(57.95)
22.9
(0.90)
55.9 (2.20)
*
**
*
*
*
199.4 (7.85)
343.0 (13.50)
486.4 (19.15)
530.9 (20.90)
425.5 (16.75)
15.7 (0.62)
Ref. (0.00)
127.7 (5.03)
271.2 (10.68)
363.7 (14.32)
414.7 (16.33)
543.3 (21.39)
558.3 (21.98)
24.8 (0.98) 28.7 (1.13) 95.8 (3.77)
178.8 (7.04)
328.7 (12.94) 478.8 (18.85)
14.7 (0.58) Ref. (0.00) 93.7 (3.69) 121.1 (4.77) 253.7 (9.99) 413.8 (16.29) 507.5 (19.98) 522.2 (20.56)
*
*
*
*
**
Fan studs are installed in alternating
directions. “
* ” indicates that the stud
points-in , all others point-out.
Enclosure Wall
Fan Stud “Pointing-In”
(Inside of Enclosure)
Fan Stud “Pointing-Out”
(Outside of Enclosure)
Important: Backplate and extension are a single
piece. Drive chassis can be removed
from backplate to mount in user
supplied IP54, NEMA/UL Type 12
enclosure