Allen-Bradley PowerFlex 700S Manual

Release Notes
PowerFlex 700S Drives with Phase II Control (30.001)
Bulletin 20D
These release notes correspond to major revision 30, minor revision 1 of
firmware for PowerFlex® 700S drives with Phase II control.
IMPORTANT Firmware revision 30.001 is compatible with PowerFlex 700S drives with Phase II
control series A main control boards only. To determine your main control board
version, see Determine Your Main Control Board Version on page 5
.
Topic Page
Determine the Firmware Revision 2
Determine Your Main Control Board Version 5
Firmware Upgrades 6
New Features and Enhancements 10
Corrected Anomalies 10
Known Anomalies 10
Restrictions 12

Allen-Bradley PowerFlex 700S Specifications

General

Model	PowerFlex 700S
Input Voltage	200-240V AC, 380-480V AC
Power Range	0.75-250 kW (1-350 HP)
Control Method	Sensorless Vector Control, Vector Control
Communication Options	EtherNet/IP, ControlNet, DeviceNet
Enclosure Type	IP20, IP30, NEMA/UL Type 1, 12
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Relative Humidity	5% to 95% (non-condensing)
Altitude	Up to 1000 m (3300 ft) without derating
I/O	Digital and Analog I/O