Rockwell Automation Publication 750-QS001A-EN-P - March 2015 81
Reference Section
16. When the desired name is displayed on the edit pop-up box, press the soft key to enter and save the new name.
Deleting CopyCat Files
1. Access the Status screen.
2. Use the or key to scroll to the Port of the device whose parameter set you want to delete (for example,
Port 00 for the host drive).
3. Press the key to display its last-viewed folder.
4. Use the or key to scroll to the MEMORY folder.
5. Use the or key to select HIM CopyCat.
6. Press the (Enter) key to display the CopyCat Files selection screen.
7. Use the or key to select Delete CopyCat File.
8. Press the (Enter) key to display the Select File To Delete pop-up box.
9. Use the or key to select the file (or all files) to delete.
10. Press the (Enter) key to display the confirmation pop-up box.
11. Press the soft key to affirm and delete the selected CopyCat file, or press the soft key to cancel.
Another pop-up box will appear to confirm that the CopyCat file was successfully deleted.
12. Press the soft key to affirm and complete the procedure.
00
Stopped
0.000 Hz
AUTO
Host Drive
240V 4.2A
20G...D014
ESC REF TEXT
F
PAR#
Stopped
0.000 Hz
AUTO
ESC
F
Port 00 CopyCat Files
CopyCat from Device to HIM
CopyCat from HIM to Device
Delete CopyCat File
Rename CopyCat File
Stopped
0.000 Hz
AUTO
F
Select File To Delete
PowerFlex 755 Cfg
Delete All Files
ESC
ESC