38 Rockwell Automation Publication 750-IN100B-EN-P - July 2017
Chapter 3 Prepare for Installation
Anchor Bolt System
Enclosures can be mounted directly to a level concrete surface by using M10
(0.375 in.) anchor bolts.
The enclosures must be secured to the anchor bolts in all four corners by using
M10 nuts and lock washers.
Figure 14 - Anchor Bolt System Cross-section
Concrete Screw System
Enclosures can be mounted directly to a level concrete surface by using M10
(0.375 in.) concrete screws.
The enclosures must be secured by the concrete screws in all four corners.
Figure 15 - Concrete Screw System Cross-section
To Next Page
Loading...
Need help?
General
