Publication 2711-UM014B-EN-P
Terminal Overview 1-39
RS-232 Cables
Remote I/O or DH+ Cable
Catalog No. Description
2711-NC13 5 meter (15 foot) connects an RS-232 terminal to the Channel 0 port of an SLC
5/03 controller or the RS-232 port of a computer or printer.
2711-NC14 10 meter (32 foot) cable connects an RS-232 terminal to the Channel 0 port of
an SLC 5/03 controller or the RS-232 port of a computer or printer.
2711-NC21 5 meter (15 foot) connects an RS-232 terminal to a MicroLogix controller
(except PV300 Micro).
2711-NC22 15 meter (49 foot) cable connects an RS-232 terminal to a MicroLogix
controller (except PV300 Micro).
2706-NC13 3 meter (10 ft) cable connects an RS-232 terminal to an SLC 5/03 controller or
the RS-232 port of a computer or printer.
1761-CBL-AP00 0.5 meter (1.5 ft) cable connects a PanelView 300 Micro RS-232 terminal to
an SLC or PLC.
1761-CBL-PM02 2 meter (6.5 ft) cable connects a PanelView 300 Micro RS-232 terminal to an
SLC or PLC.
2711-CBL-PM05 5 meter (15 ft) cable connects a PanelView 300 Micro RS-232 terminal to a
ControlLogix, AIC+, SLC controller, or computer RS-232 port.
2711-CBL-PM10 10 meter (30 ft) cable connects a PanelView 300 Micro RS-232 terminal to a
ControlLogix, AIC+, SLC controller, or computer RS-232 port.
1761-CBL-AMOO 0.5 meter (1.5 ft) cable connects a PanelView 300 Micro RS-232 terminal to a
MicroLogix.
1761-CBL-HM02 2 meter (6.5 ft) cable connects a PanelView 300 Micro RS-232 terminal to a
MicroLogix.
2711-CBL-HM05 5 meter (15 ft) cable connects a PanelView 300 Micro RS-232 terminal to a
MicroLogix 1000/1200/1500, DeviceNet DNI, or AIC+ module.
2711-CBL-HM10 10 meter (30 ft) cable connects a PanelView 300 Micro RS-232 terminal to a
MicroLogix 1000/1200/1500, DeviceNet DNI, or AIC+ module.
Catalog No. Description
1770-CD Shielded, 3-conductor cable (Belden 9463) for connecting a Remote I/O
terminal to a Remote I/O network.
To Next Page
Loading...
Need help?
General
