28 Rockwell Automation Publication 42EF-UM001A-EN-P - September 2015
Registering the 42EF IODD
Chapter 7
Registering the 42EF IODD
To initialize a sensor on an IO-Link Master, register the IODD of the sensor.
The IO Device Description (IODD) files contain the information that is related
to the sensor, integrated into the system environment.
By default, the IODDs are already located in the AOP Library.
If the IODD file for the 42EF cannot be located in the library, it can be
do
wn
loaded from
http://compatibility.rockwellautomation.com/Pages/
MultiProductDownload.aspx. Once the IODD is registered, there’s no need to
register the IODD again unless it is manually deleted from the Master Tree.
1. Double-click the 1734-4IOL in the Controller Organizer Tree.
To Next Page
Loading...