Allen + Roth 28MM081PPC User Manual (English)

Questions and Answers:

S
Shannon CampbellJul 31, 2025
What to do if my Allen + Roth 28MM081PPC Indoor Fireplace heater doesn’t work, but Power and Heater settings are “ON” and thermostat is set?
- M
  Megan VazquezJul 31, 2025
  If your Allen + Roth Indoor Fireplace heater isn’t working despite the power and heater being on and the thermostat set, it might be in protected status. To resolve this, turn all switches to the “OFF” position and unplug the unit from the wall outlet for 5 minutes. After 5 minutes, plug it back in and operate as normal.
M
Michael MirandaAug 5, 2025
Why is there no power and the logs don't glow on my Allen + Roth 28MM081PPC Indoor Fireplace?
- D
  Debbie BoydAug 5, 2025
  If your Allen + Roth Indoor Fireplace has no power and the logs don't glow, it could be due to a couple of reasons: 1. The power cord might not be properly plugged into the outlet. Ensure the unit is plugged into a standard 120V outlet. 2. The main power switch might not be in the “ON” position. Try pressing the power button several times, making sure it is set to “ON”.
H
huntkatrinaAug 10, 2025
What to do if the flame effect works but heater function does not and the emberbed flashes when the heater button is pressed on my Allen + Roth Indoor Fireplace?
- K
  Katherine GalvanAug 10, 2025
  If the flame effect works but the heater function does not and the emberbed flashes when the heater button is pressed on your Allen + Roth Indoor Fireplace, the heater function is likely locked. To unlock it, press and hold the POWER button.
J
John WagnerAug 15, 2025
Why is there a log glow, but no flame effect on my Allen + Roth Indoor Fireplace?
- J
  Jessica GriffinAug 15, 2025
  If the logs glow, but there is no flame effect on your Allen + Roth Indoor Fireplace, the flame button might not be in the “ON” position. Press the flame button several times to activate the flame effect.
M
malonechristopherAug 20, 2025
Why doesn't the heater blow warm air in my Allen + Roth 28MM081PPC?
- A
  Angel ParksAug 20, 2025
  If the heater in your Allen + Roth Indoor Fireplace doesn't blow warm air, it could be because the current room temperature is higher than the temperature setting on the fireplace. Adjust the temperature settings to ensure that the thermostat is set higher than the current room temperature.
T
Timothy CooleyAug 25, 2025
How to fix down lights that do not light up on my Allen + Roth 28MM081PPC Indoor Fireplace?
- K
  Kevin GarciaAug 26, 2025
  If the down lights on your Allen + Roth Indoor Fireplace do not light up, the downlight button might not be in the “ON” position. Try turning the downlight switch on and off several times to ensure it is in the “ON” position.