Allen + Roth 3730315 User Manual (English)

Questions and Answers:

A
alan74Aug 15, 2025
Why is the Allen + Roth Indoor Fireplace power cord getting warm?
- L
  Lynn AllenAug 15, 2025
  It's normal for the power cord of your Allen + Roth Indoor Fireplace to get warm during operation because the heater requires more current. Ensure the plug fits tightly into the outlet and check the connections of the appliance cord and the outlet. If the plug or outlet becomes HOT, stop using the appliance and consult a qualified technician to inspect or replace the overheating outlet(s).
T
tracybutlerAug 18, 2025
What to do if my Allen + Roth 3730315 Indoor Fireplace remote control doesn't work?
- A
  Amber WilliamsAug 18, 2025
  If the remote control for your Allen + Roth Indoor Fireplace isn't working, the first thing to try is replacing the battery with a new CR-2025 battery.
A
aguirretimothyAug 21, 2025
What to do if my Allen + Roth 3730315 shows error E1?
- P
  patriciafigueroaAug 21, 2025
  If your Allen + Roth Indoor Fireplace displays error code E1, it indicates the overheat sensor has been activated. To resolve this, unplug the unit and wait 15-20 minutes to allow the sensor to reset. Then, plug the unit back in and turn on the heater. If the problem continues, contact customer service. Note that while the error is present, the heater will not function, but other functions should work normally.
S
Sabrina ShieldsAug 25, 2025
What to do if my Allen + Roth 3730315 shows error E2?
- A
  Alan AdamsAug 25, 2025
  If your Allen + Roth Indoor Fireplace displays error code E2, it means the thermostat sensor is either broken or not functioning correctly. Unplug the unit and wait 15-20 minutes for the sensor to reset. Plug it back in and turn on the heater. If the issue persists, contact customer service. Note that the heater will not function, but other functions should work normally.
J
John MasonAug 28, 2025
Why is my Allen + Roth 3730315 Indoor Fireplace fan still blowing after I turn it off?
- S
  Scott ParkerAug 28, 2025
  The fan motor in your Allen + Roth Indoor Fireplace continues to run after being powered off as a standard feature to cool down the heater tubes.
A
annefischerAug 31, 2025
How to fix a weak remote control signal on Allen + Roth 3730315?
- D
  dreyesAug 31, 2025
  If the remote control signal for your Allen + Roth Indoor Fireplace is weak, try these solutions: * Press the buttons on the remote slowly and steadily. * Move closer to the fireplace insert, ensuring you are within 20 feet and 45 degrees to either side of the front of the unit.
L
Linda RollinsSep 4, 2025
Why is there no power to my Allen + Roth 3730315?
- E
  emily27Sep 4, 2025
  If your Allen + Roth Indoor Fireplace has no power, first check that the power cord is securely plugged into a standard 120V outlet. Then, make sure the unit is powered on.
C
Caleb RiveraSep 7, 2025
Why is the heater and blower not working on my Allen + Roth 3730315 Indoor Fireplace?
- J
  Joel SmithSep 7, 2025
  If the heater and blower on your Allen + Roth Indoor Fireplace aren't working while other functions are, make sure the heater is set to "HI" (High) to ensure continuous operation.
E
Erin GibbsSep 10, 2025
Why is there no flame effect on my Allen + Roth 3730315?
- K
  kmcgrathSep 12, 2025
  If your Allen + Roth Indoor Fireplace has no flame effect but the unit is powered on: * Check if the flame effect is powered off, push the flame brightness button until desired level is achieved. * Make sure that the USB cable is connected into the USB port behind the Fireplace Grate.