A SAFETY INFORMATION
I
A
WARNING
ELECTRIC SHOCK HAZARD
&
To
reduce the risk
of
electric
shock, do not use this fan with any
solid-state speed control device.
A
WARNING
&
SHOCK HAZARD
To
reduce the risk
of
shock, this fan
must be in.stalled with an isolation wall
control/sw1tch.
A
WARNING
ELECTRIC SHOCK HAZARD
To
reduce the risk
of
electric shock, make sure electricity has been turned off at the circuit
breaker
or
fuse box before beginning installation.
A
WARNING
PERSONAL INJURY HAZARD
To
reduce the risk
of
personal injury, do not bend the blade brackets when installing the
brackets, balancing the blades,
or
cleaning the fan. Do not insert foreign objects in
between rotating fan blades.
.
AWARNING
FIRE, ELECTRICAL SHOCK OR PERSONAL INJURY HAZARD
To
reduce the risk
of
fire, electric shock,
or
personal injury, mount to outlet box marked "AC-
CEPTABLE FOR
FAN
SUPPORT," (Mounting must support at least 351bs.) and use mount-
ing screws provided with the outlet box. Most outlet boxes commonly used for the support
of
lighting fixtures are not acceptable for fan support and may need to be replaced. Consul
a qualified electrician
if
in doubt.
A
WARNING
&
FIRE, ELECTRICAL SHOCK
OR
PERSONAL INJURY HAZARD
When cutting
or
drilling into wall
or
ceiling, do not damage electrical wiring and other hidden
utilities.
I
CAUTION
PERSONAL INJURY HAZARD
To
reduce the risk
of
injury to persons, install fan so that the blade is at least
7ft.
(2.1 m) above the
floor.
3
To Next Page
Loading...
