HARDWARE CONTENTS
Note:
• Extra hardware
EE,
FF
and GG should
be
used
in
step 1
in
the assembly instructions if they
are needed.
• Extra hardware JJ should
be
used
in
step 12
in
the assembly instructions if it is needed.
• Extra hardware KK should
be
used
in
step 8
in
the assembly instructions if it is needed.
• Extra hardware
LL
should
be
used
in
step 14
in
the assembly instructions if it is needed.
PREPARATION
Before beginning assembly
of
product, make sure all parts are present. Compare parts with
package contents list and hardware contents. If any part is missing
or
damaged, do not attempt
to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 30 minutes
Tools Required for Assembly (not included): Phillips screwdriver, step ladder, electrical tape,
pliers, wire cutter, wire stripper.
WARNING: Before starting assembly
of
this product, please disconnect power to area and
familiarize yourself with the safety information provided on page 2 and
3.
6
To Next Page
Loading...
