Allen + Roth Reagan 72-BVF11-BB-AR

Questions and Answers

B
Brent BassAug 27, 2025
What to do if my Allen + Roth Bathroom Fixture faucet leaks around the aerator?
- S
  spetersAug 27, 2025
  If your Allen + Roth bathroom fixture faucet leaks around the aerator, it could be due to incorrect fitting, dirt, or improperly installed small parts inside the aerator. To resolve this: 1. Remove the aerator cover from the spout by turning it counterclockwise. Remove the aerator and gasket. 2. Inspect the black rubber gasket inside the aerator to ensure it is flat. 3. Reinstall the gasket and aerator, then replace and tighten the aerator cover on the spout.
P
paulallenSep 3, 2025
Why does my Allen + Roth Bathroom Fixture faucet have an improper water pattern?
- T
  Timothy BrownSep 3, 2025
  An improper water pattern in your Allen + Roth bathroom fixture faucet is often caused by a dirty aerator or small parts inside the aerator being improperly installed. To correct this: 1. Remove the aerator cover from the spout by turning it counterclockwise and remove the aerator and gasket. 2. Gently flush the small parts inside the aerator to clear away any debris. 3. Reinstall the gasket and aerator, then replace and tighten the aerator cover on the spout, making sure all parts are straight and flat.
S
Susan WatsonNov 11, 2025
Why does my Allen + Roth Bathroom Fixture faucet leak underneath the handle?
- P
  pkingNov 11, 2025
  A leak under the handle of your Allen + Roth bathroom fixture faucet may occur if the bonnet has come loose or the O-ring on the cartridge is dirty or twisted. Here's how to address it: 1. Turn the handle to the OFF position, unscrew the handle screw, and remove the handle. 2. Tighten the bonnet clockwise. Move the cartridge stem to the ON position to see if the leak stops. 3. If the leak persists, shut off the water supply. Remove the bonnet counterclockwise and lift out the cartridge valve. Inspect the O-rings for debris or twisting. Straighten twisted O-rings. If damaged, replace the cartridge by calling customer service. 4. Position the cartridge back into the faucet body, ensuring the ridges on the bonnet fit into the grooves on the faucet body. Tightly screw the bonnet onto the ...
F
Frank WashingtonNov 17, 2025
How to fix an Allen + Roth Bathroom Fixture faucet that doesn't completely shut off?
- B
  Brittany WilsonNov 17, 2025
  If your Allen + Roth bathroom fixture faucet doesn't completely shut off, it might be due to a dirty, stuck, or broken rubber valve seat. Here's how to fix it: 1. Shut off the water supply. 2. Remove the handle and loosen the bonnet by turning it counterclockwise. Lift out the cartridge assembly. 3. Inspect the rubber valve seat in the faucet body for debris or brass scrap; remove any found. Ensure the rubber seat moves smoothly when pushed gently. The spring (smaller end up) must be placed back underneath the valve seat. If the rubber valve seat is worn out or broken, replace the cartridge by calling customer service. 4. Position the cartridge back into the faucet body, ensuring the ridges on the bonnet fit into the grooves on the faucet body. Tightly screw the bonnet onto the faucet...

Allen + Roth Reagan 72-BVF11-BB-AR Specifications

General

Brand	Allen + Roth
Model	Reagan 72-BVF11-BB-AR
Category	Bathroom Fixtures
Type	Bathroom Vanity
Width (in)	72
Style	Traditional
Color/Finish Family	Brown
Number of Drawers	6
Number of Doors	2
Countertop Included	Yes
Sink Included	Yes
Number of Holes	3
Installation Type	Freestanding
Handle Type	Knob
Material	Wood
Dimensions	72 x 22 x 34 inches
Faucet Hole Spacing	8-inch widespread