Allen + Roth 4065451 User Manual

1
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at (866) 439-9800, 8 a.m. - 8 p.m., EST, Monday - Sunday. You could
also contact us at partsplus@lowes.com or visit www.lowespartsplus.com.
Serial Number: Purchase Date:
SM21519
ITEM #4065451
MODEL #4065451
ALLEN + ROTH and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.
78-in Statuary Porcelain
Tile Shower Wall
ATTACH YOUR RECEIPT HERE
Español p. 15

Allen + Roth 4065451 Specifications

General

Brand	Allen + Roth
Model	4065451
Category	Bathroom Fixtures
Language	English

Summary

How To Use This Instruction Manual

Package Contents

Recommended Tools Not Provided

Materials Not Provided

Installation Instructions

Draw out the installation area

Prepare the installation site by drawing layout lines on the back and side walls.

Install porcelain panels on the back wall

Apply thin-set to the back wall and panel, position the panel, and secure with leveling clips.

Install porcelain panel on side wall without the shower valve

Install a side wall panel, applying thin-set and securing it with an aluminum edge trim.

Install porcelain panel on side wall with the shower valve

Cut a hole for the shower valve, apply thin-set, and install the panel.

Installing inside corner porcelain moldings

Apply silicone sealant to moldings and secure them into the corners with shims.

Seal all seams with silicone sealant

Apply silicone sealant to all joints and exposed panel edges, then clean excess.

Let the shower panel installation cure

Allow the installed shower panels to dry for at least 24 hours for thin-set and sealant to cure.

Drill holes for shower door hardware

Drill holes for hardware using specific drill bits and water to ensure a watertight seal.

Substrate Types

Limited Warranty

Care Instructions