EasyManua.ls Logo

Alliance Laundry Systems 70444901R3 User Manual

Alliance Laundry Systems 70444901R3
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Programming
www.comlaundry.com
Tumble Dryer
OPL Electronic Control
Refer to Page 3 for Model Identification
Part No. 70444901R3
July 2011
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Alliance Laundry Systems 70444901R3 and is the answer not in the manual?

Alliance Laundry Systems 70444901R3 Specifications

General IconGeneral
BrandAlliance Laundry Systems
Model70444901R3
CategoryDryer
LanguageEnglish

Summary

Preliminary Information

Model Identification

Lists model numbers based on capacity and fuel type.

About the Control

Describes the electronic control's functions and capabilities.

Control Identification

Operational Keypad

Describes the functions of the control panel's keypads.

Operation Modes

Explains the various states the control can be in, such as Idle, Run, and Pause.

Machine Cycle Definition and Operation

Entering the Manual Mode

How to Enter the Manual Mode

Detailed steps to access the manual mode for testing and programming.

Programming Control

What Can Be Programmed?

Overview of user-programmable features and parameters.

How to Program a Cycle

Step-by-step guide on programming cycles using the keypad.

Collecting Audit Information

Manual Reset

How to Enter Manual Reset

Procedure for resetting control programming to factory defaults.

Testing Machine and Electronic Control Functions

How to Enter Testing Feature

Steps to access the diagnostic testing mode.

Production Test Cycle

Machine Errors

Air Flow Switch Errors

Errors related to the airflow switch functionality.

Rotation Sensor Error

Error if cylinder RPM drops to zero unexpectedly.

DIP Switch/Harness Index Mismatch Error

Mismatch between DIP switch and harness configuration.

Error Codes

Related product manuals