Alliance Laundry Systems SDE907 User Manual

Alliance Laundry Systems SDE907

52 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Installation/Operation

www.comlaundry.com

Clothes Dryer

Nonmetered and Metered

Electric and Gas Models

D677I

Part No. 512680R5

September 2009

Keep These Instructions for Future Reference.

(If this machine changes ownership, this manual must accompany machine.)

Table of Contents

Questions and Answers:

M
Mark HarrisJul 30, 2025
How to fix Alliance Laundry Systems Dryer that won’t start?
- N
  Nicole LoweJul 30, 2025
  If your Alliance Laundry Systems Dryer won't start, try the following: ensure the timer knob is fully engaged, insert coins or a card, activate the timer and fully push in the coin slide, verify the power cord is completely plugged in, confirm the loading door is closed, press the PUSH-TO-START button or START pad, check the laundry room fuse(s) and circuit breakers, and wait 10 minutes to see if the motor overload protector has cycled.
C
collinsdouglasAug 3, 2025
Why is my Alliance Laundry Systems Dryer not heating?
- D
  david28Aug 3, 2025
  If your Alliance Laundry Systems Dryer isn't heating, make sure the timer knob is fully engaged and the coin slide is completely pushed in. Check that the laundry room fuses aren’t blown or loose and the circuit breakers aren’t open. Ensure the controls are set to a HEAT setting and that the equipment and main gas line valve are turned on. Also, inspect the exhaust duct and weather hood for any blockages or restrictions.
B
Benjamin AguilarAug 9, 2025
What to do if Alliance Laundry Systems Dryer doesn’t dry clothes satisfactorily?
- K
  kristiejonesAug 9, 2025
  If your Alliance Laundry Systems Dryer isn’t drying clothes well enough, start by checking the exhaust duct and weather hood for any blockages or kinks. Ensure the lint filter is clean. Also, consider the load size and type of items being dried; very small loads or drying heavy items with lightweight items can affect drying performance.
N
Nathan MillerAug 14, 2025
Why is my Alliance Laundry Systems Dryer so noisy?
- M
  montoyajosephAug 14, 2025
  If your Alliance Laundry Systems Dryer is making unusual noises, check for any foreign objects like nails, coins, or toys inside the dryer and remove them. Ensure the dryer is level. Normal operating sounds include the timer, the heat source turning on and off, and the sound of air moving through the dryer.
K
Kyle McguireAug 18, 2025
How to prevent clothes from being too wrinkled in Alliance Laundry Systems Dryer?
- S
  Scott WarnerAug 19, 2025
  If your clothes are coming out too wrinkled from the Alliance Laundry Systems Dryer, consider adjusting the heat setting to avoid overdrying, which can cause wrinkles. Also, check the load size, as large loads may not tumble properly and can lead to wrinkling.
W
William Rowland MDAug 25, 2025
Why do my clothes have odor after drying in Alliance Laundry Systems Dryer?
- S
  Stephanie PenningtonAug 25, 2025
  If your clothes have an odor after drying in your Alliance Laundry Systems Dryer, check the room for any existing odors like fried foods, paint, or cleaners, as the dryer can draw these odors into the clothing. Ventilate the room before drying clothes.

Alliance Laundry Systems SDE907 Specifications

General

Brand	Alliance Laundry Systems
Model	SDE907
Category	Dryer
Language	English

Summary

Safety Information

General Safety Warnings

Critical safety alerts for fire, electric shock, and injury risks.

Explanation of Safety Messages

Defines hazard symbols (DANGER, WARNING, CAUTION) and message types.

Important Safety Instructions

Detailed list of essential precautions for safe dryer operation and use.

Installation

Dryer Dimensions and Clearances

Positioning and Leveling the Dryer

Step-by-step guide for placing and leveling the dryer unit.

Connecting the Dryer Exhaust System

Instructions and safety warnings for proper exhaust duct installation.

Gas Supply Pipe Connection

Procedures for connecting the gas supply pipe to the dryer.

Electrical Connection and Grounding

Guides for connecting electrical power, grounding, and power cords.

Checking the Heat Source

Operation

Nonmetered and Coin Slide Dryer Operation

Step-by-step guide for operating nonmetered and coin slide models.

Electronic Display Control Dryer Operation

MDC Dryer Operation

NetMaster Dryer Operation

Vending and Control Settings

Meter Case and Coin Slide Operation

Dipswitch Settings for Cycle Configuration

Troubleshooting

Common Dryer Issues and Solutions

Related product manuals

Alliance Laundry Systems STT30N

Alliance Laundry Systems STT45N

Alliance Laundry Systems ST030E

Alliance Laundry Systems ST030N

Alliance Laundry Systems ST055N

Alliance Laundry Systems ST075N

Alliance Laundry Systems STB50CG

Alliance Laundry Systems STB75CG

Alliance Laundry Systems ST120FG

Alliance Laundry Systems CA050L

ADEE9BGS175TW01