To Next PageTo Next Page
Need help?Do you have a question about the Alliance Laundry Systems STB50CG and is the answer not in the manual?
General| Brand | Alliance Laundry Systems |
|---|---|
| Model | STB50CG |
| Category | Dryer |
| Type | Commercial |
| Capacity | 50 lb |
| Heating Source | Gas |
| Voltage | 208-240V |
| Phase | 1 |
| Exhaust Size | 8 inches |
Covers overall safety warnings, important notes, and legal compliance for safe operation.
Details warnings related to gas leaks, fire, and explosion hazards.
Lists essential precautions to reduce risks of fire, shock, injury, or death.
Lists available tumbler models, capacities, and includes a conversion table.
Provides details on nameplate location and how to order replacement parts.
Provides an overview of cabinet dimensions and general connection location types.
Guides on inspecting the delivered tumbler and preparing the installation site with required materials.
Instructions for positioning, leveling the tumbler, and ensuring proper enclosure clearances.
Details on exhaust ducting, air circulation, and make-up air requirements for safe operation.
Specifies requirements for gas, steam, and electrical service connections.
Procedure to adjust the air shutter for optimal burner combustion and flame.
Instructions for adjusting the air flow switch for proper tumbler operation.
Guides for adjusting the cylinder door switch and strike for correct operation.
Instructions for adjusting belt or chain drive tension for proper operation.
Step-by-step guide for operating tumblers with manual dual timer controls.
Instructions for operating coin-drop and coin-slide models, including electronic controls.
Details on how to use the reversing feature and its control switch.
Guide for operating tumblers with OPL micro-control panels.
Procedure for daily cleaning of the lint screen and compartment.
Covers monthly, three-month, and six-month maintenance tasks and checks.
Lists common problems and their potential causes and solutions.
