Alliance Laundry Systems SDE907 - Step 5: Reverse Door, if Desired

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
23
512680
Step 5: Reverse Door, if Desired
The door on this dryer is completely reversible. To
reverse door proceed as follows:
1. Remove four hinge attaching screws.
2. Remove all nine screws.
3. Pull bottom of door liner out, then pull down,
removing door liner from door panel.
4. Rotate door panel 180 degrees as shown.
5. Remove door strike from door liner and reinstall
on opposite side.
6. Insert liner under flange on bottom of door, then
push top of door liner into place.
7. Reinstall nine screws removed in Step 2.
Figure 21
Figure 22
Figure 23
D675I
D675I
D272P
DRY1916N
%
$
DRY1916N
Figure 24
Figure 25
Figure 26
Figure 27
D273P
DRY1917N
DRY1917N
DRY1918N
%
$
DRY1918N
DRY1919N
DRY1919N