Need help?Do you have a question about the Alliance Laundry Systems 75 and is the answer not in the manual?
General| Brand | Alliance Laundry Systems |
|---|---|
| Model | 75 |
| Category | Dryer |
| Phase | 1 or 3 |
| Heating Source | Gas or Electric |
| Capacity | 75 lb |
| Type | Commercial Tumble Dryer |
Guide to finding authorized service personnel for maintenance and repairs.
Lists applicable models covered in the manual.
Contact information for parts, literature, and technical assistance.
Essential safety measures to follow before and during servicing.
Explains the airflow and operational principles of the tumbler.
Troubleshooting steps for a motor that fails to start.
Steps to resolve issues with heating elements or burners not igniting.
Specific troubleshooting for models with electronic controls.
Troubleshooting a tumbler that won't start with manual timers.
Troubleshooting steps for an igniter that fails to spark.
Procedures for proper grounding to ensure electrical safety.
Instructions for accessing and removing the control panel.
Procedures for removing and replacing relays in manual timer models.
Steps for removing and replacing the control thermostat.
Steps to remove and service the gas valve.
Procedures for servicing contactors and terminal blocks.
Instructions for replacing the heater element in electric tumblers.
Steps to access and replace the high limit thermostat on gas models.
Instructions for removing and reinstalling the front panel.
Procedures for removing and adjusting the airflow switch assembly.
Steps for replacing the drive belt on nonreversing and reversing tumblers.
Procedures for removing and reinstalling the cylinder assembly.
Steps for removing and reinstalling the motor and fan assembly.
Instructions for leveling the tumbler for proper operation and stability.
Adjusting air inlet shutters for optimal burner combustion.
Procedures for checking and adjusting the airflow switch.
Adjusting the loading door switch for proper operation.
Steps to adjust drive belt tension, noting impact on chain tension.
Procedures for adjusting chain and belt tension on tumblers.
Adjusting cylinder clearance to prevent rubbing against the front panel.
To Next Page
