To Next PageTo Next Page
Need help?Do you have a question about the Alliance Laundry Systems JT50CG and is the answer not in the manual?
General| Brand | Alliance Laundry Systems |
|---|---|
| Model | JT50CG |
| Type | Tumble Dryer |
| Capacity | 50 lb |
| Energy Source | Gas |
| Voltage | 120V |
| Amperage | 15A |
| Appliance Category | Commercial |
Essential safety precautions for operating the drying tumbler to prevent hazards.
Provides basic information for quick access and reference regarding the tumblers.
Details on where to find the tumbler's identification nameplate for model and serial numbers.
Instructions on how to obtain literature, replacement parts, and technical assistance.
Provides detailed measurements for tumbler cabinets, including height, width, depth, and door clearances.
Specifies the location and diameter for horizontal and vertical exhaust thimbles for various models.
Details steam inlet and outlet connection points, including diameter, across, height, and span.
Outlines gas connection points, specifying diameter, across, and height for different tumbler models.
Shows locations for electrical service connections for gas, steam, and electric tumbler models.
Technical specifications for 30 lb, 28" wide gas and electric drying tumblers.
Technical specifications for 30 lb, 31.5" wide gas, electric, and steam drying tumblers.
Technical specifications for 50 lb gas, electric, and steam drying tumblers.
Technical specifications for 75 lb gas, electric, and steam drying tumblers.
Technical specifications for 120 lb gas and steam drying tumblers.
Technical specifications for 170 lb gas and steam drying tumblers.
Procedures for inspecting the tumbler upon delivery for any shipping damage.
Lists materials needed for installation that are not supplied with the tumbler.
Guidelines for safely moving and positioning the tumbler at its installation location.
Instructions for ensuring the tumbler is level for optimal operation and stability.
Recommendations for constructing enclosures around the tumbler, including clearance requirements.
Requirements for floor load capacity, layout, and venting for tumbler installation.
Guidance on the optimal placement of tumblers for installation and air circulation.
Proper procedures and requirements for exhausting tumbler air to the outdoors to prevent fire risks.
Importance and requirements for providing adequate make-up air for proper tumbler operation and combustion.
Critical information regarding gas supply type, pressure, and connection safety for gas models.
Specifications and recommendations for steam supply piping and connections for steam models.
Guidelines for safe electrical connections, including grounding and wiring specifications.
Procedures for adjusting the gas burner air shutter for proper flame and combustion.
Steps to adjust the air flow switch for correct operation and safety.
Explains the function of the air flow light and its indication of airflow issues.
Instructions for adjusting the cylinder door switch to ensure proper safety shut-off.
Guidance on adjusting the door strike for secure door closure and proper switch activation.
Procedures for adjusting belt and chain tension for non-reversing and reversing drive models.
Step-by-step guide for operating tumblers with manual dual timer controls.
Instructions for operating coin-drop and coin-slide models, including electronic controls.
Detailed instructions for operating tumblers with electronic OPL controls.
Explanation of the buttons and display functions on the OPL micro-control panel.
Describes the meaning of status lights, signals, and how to use the reversing function.
Guide to selecting appropriate fabric types for optimal drying cycles.
Instructions for choosing and setting automatic, time dry, special, and custom drying cycles.
How to enable and disable the security lock-out feature for operator control.
Procedures for adjusting drying temperatures and displaying temperature settings.
How to enter and exit the show mode for display diagnostics.
Procedures for testing the temperature sensor and identifying potential faults.
Routine checks and cleaning tasks to be performed daily.
Daily procedure for cleaning the lint screen and compartment to ensure proper airflow.
Tasks to be performed monthly for machine upkeep.
Information on lubrication requirements, noting that most bearings are pre-lubricated.
Tasks to be performed every three months for thorough maintenance.
Periodic cleaning of air vents, steam coils, and exhaust ducts for optimal performance.
Tasks to be performed every six months for comprehensive checks.
Routine inspection for loose connections, gas leaks, and proper electrical grounding.
Common problems and their solutions for diagnosing and fixing tumbler malfunctions.
